Product Search
- Ubiquiti 2,4 GHz (5)
- Ubiquiti 5 GHz (6)
- Ubiquiti AirMAX 2,4 GHz (4)
- Ubiquiti AirMAX 5 GHz (18)
- Ubiquiti AirMAX 10 GHz (3)
- MikroTik RouterBoards (38)
- MikroTik miniPCI cards (4)
- MikroTik other (29)
- CC&C wireless (2)
- GOLDWEB wireless (3)
- GOLDWEB wired (5)
- TP-Link wireless (20)
- TP-Link wired (43)
- PC Engines ALIX (6)
- Antennas 2,4 GHz (7)
- Antennas 5 GHz (52)
- miniPCI cards (12)
- IP cameras + recorders (31)
- EU 230V powering (38)
- LED bulbs (40)
- Accesories (23)
- Green Energy (10)
- EVBike (17)
- GPS (3)
- Services (2)
You are here: / Ubiquiti AirMAX 2,4 GHz All prices without VAT
Similar Products
Customer who bought this product also bought:
UBIQUITI NanoStation Loco M2 AirMAX MIMO - outdoor 2,4 GHz, 2x 8 dBi antenna
NanoStation M2 Loco is a compact outdoor unit including 2x 8dBi antennas (MIMO) for 2,4GHz band. Unit have real data throughput up to 150Mbps.
For high speed transmission unit uses standard 802.11n and time multiplex TDMA for connecting more than 300 clients in AP mode. And all this with low latency.
Instead previous model, NanoStation 2 Loco have bigger memory and better processor clocked at 400MHz.
Web-based configuration is very simple and clear. Can be set as:
Included is a 24 V PoE power source, which includes a reset button putting device into firmware recovery TFTP mode. In additional unit supports PoE at second UTP port for direct power supply of second device. This feature can be software disabled.
Important compatibility information:
This device uses the new firmware AirOS V. For this reason, it is possible that it will not fully compatible with other radio devices. If you are not sure, ask us directly at email tech@i4wifi.cz.
AirOS system is constantly being improved and we therefore recommend to always use the current version by downloading below in related documents.
Instead previous model, NanoStation 2 Loco have bigger memory and better processor clocked at 400MHz.
Web-based configuration is very simple and clear. Can be set as:
- AP mode, client or WDS
- traffic shaping
- QoS
- between WAN and LAN routing and transparent bridge with or without NAT
- signal strength, which is suited to the specific LED indicator
- output power up to 23 dBm
Included is a 24 V PoE power source, which includes a reset button putting device into firmware recovery TFTP mode. In additional unit supports PoE at second UTP port for direct power supply of second device. This feature can be software disabled.
Important compatibility information:
This device uses the new firmware AirOS V. For this reason, it is possible that it will not fully compatible with other radio devices. If you are not sure, ask us directly at email tech@i4wifi.cz.
AirOS system is constantly being improved and we therefore recommend to always use the current version by downloading below in related documents.
manual_NSM2.pdf
CZ_datasheet_UBNTNSLM2.pdf
NanoM2_Loco_v5_3_build7782.zip
xmv521-rc.zip
loco_m2_datasheet.pdf
NanoM2_CE_DOC.pdf
LocoM2_v5_3_2_build8909.zip
Specification
| Operation mode | AP, Client, WDS |
| Frequence | 2400 - 2486 MHz |
| DHCP | yes |
| Transmission speed | 300 Mbps |
| Standards | 802.11b/g/n |
| Chipset | Atheros |
| TX Power regulation | yes |
| Max. output power | 23 dBm |
| Sensitivity | -96 dBm |
| Modulation | OFDM, DBPSK, DQPSK, CCK, 64QAM,16QAM |
| Encryption | WEP, WPA, WPA2 |
| Comformity | FCC, CE |
| LAN port | 1x RJ45 10/100 Mbps |
| Default IP | 192.168.1.20 |
| Default name | ubnt |
| Default password | ubnt |
| Power supply | 24 V, 0,5 A |
| Operational temperature | -30 to 80 °C |
| Dimension | 163 x 31 x 80 mm |
| Interface | LAN, WiFI |
| Gain | 8 dBi |
| Polarization | Lineární - horizontální a vertikální |
| SWR | < 1,4 |
| Radiating angle - H | 60°/60° |
| Radiating angle - V | 60°/60° |
| Procesor | MIPS 24KC, 400 MHz |
| RAM | 32 MB |
| NAND | 8 MB |
| Weight | 0,18 kg |
| OS | AirOS V |
Product 2 / 4
