Product Search
- Ubiquiti 2,4 GHz (5)
- Ubiquiti 5 GHz (6)
- Ubiquiti AirMAX 2,4 GHz (4)
- Ubiquiti AirMAX 5 GHz (18)
- Ubiquiti AirMAX 10 GHz (3)
- MikroTik RouterBoards (38)
- MikroTik miniPCI cards (4)
- MikroTik other (29)
- CC&C wireless (2)
- GOLDWEB wireless (3)
- GOLDWEB wired (5)
- TP-Link wireless (20)
- TP-Link wired (43)
- PC Engines ALIX (6)
- Antennas 2,4 GHz (7)
- Antennas 5 GHz (52)
- miniPCI cards (12)
- IP cameras + recorders (31)
- EU 230V powering (38)
- LED bulbs (40)
- Accesories (23)
- Green Energy (10)
- EVBike (17)
- GPS (3)
- Services (2)
You are here: / Ubiquiti AirMAX 5 GHz All prices without VAT
Customer who bought this product also bought:
UBIQUITI NanoBridge M5 AirMAX 25 dBi - MIMO 2x2 - outdoor 5 GHz, 1x LAN
NanoBridge M5 is powerfull all-in-one outdoor unit including 2x 25dBi MIMO antennas for 5GHz band, suitable for PtP connection. Real throughput is up to 150Mbps.
For high speed transmission unit uses standard 802.11n and when used as a client unit also supports AirMAX (TDMA) technology to connect to AP with low latency.
The unit can be operated only with a 802.11n devices, older 802.11a standard is not supported.
Antenna system consists of two antennas (MIMO) with horizontal and vertical polarization, using patented technology InnerFeed to achieve the best features while maintaining a good price.
Web-based configuration is very simple and clear. Can be set as:
Included is a 24 V PoE power source, which contains the reset button for putting device to TFTP firmware recovery mode.
Important compatibility information:
This device uses the new firmware AirOS V. For this reason, it is possible that it will not fully compatible with other radio devices. For further details, please contact us directly at email tech@i4wifi.cz.
AirOS system is constantly being improved and we therefore recommend to always use the current version by download below in related documents.
The unit can be operated only with a 802.11n devices, older 802.11a standard is not supported.
Antenna system consists of two antennas (MIMO) with horizontal and vertical polarization, using patented technology InnerFeed to achieve the best features while maintaining a good price.
Web-based configuration is very simple and clear. Can be set as:
- AP mode, client or WDS
- traffic shaping
- QoS
- between WAN and LAN routing and transparent bridge, with or without NAT
- signal strength, which is suited to the specific LED indicator
- output power up to 23 dBi
Included is a 24 V PoE power source, which contains the reset button for putting device to TFTP firmware recovery mode.
Important compatibility information:
This device uses the new firmware AirOS V. For this reason, it is possible that it will not fully compatible with other radio devices. For further details, please contact us directly at email tech@i4wifi.cz.
AirOS system is constantly being improved and we therefore recommend to always use the current version by download below in related documents.
NanoBridgeM5_v5_3_2_build8909.zip
xmv521-rc.zip
xmv52.zip
xmv52-rc.zip
NanoBridgeM5_DS_CZ.pdf
NB5_CE_DoC.pdf
navod_nanobridge.pdf
aircontrol-104.zip
en_datasheet.pdf
Specification
| Operation mode | AP, Client, WDS |
| Frequence | 5,4 - 5.825 GHz |
| DHCP | yes |
| Transmission speed | 300 Mbps |
| Standards | 802.11a/n |
| Chipset | Atheros |
| Output for an external antenna | no |
| TX Power regulation | yes |
| Max. output power | 25 dBm |
| Sensitivity | -96 dBm |
| Modulation | OFDM, QAM |
| Encryption | WEP, WPA, WPA2 |
| Comformity | FCC, CE |
| LAN port | 1x RJ45 10/100 Mbps |
| Default IP | 192.168.1.20 |
| Default name | ubnt |
| Default password | ubnt |
| Power supply | 24 V |
| Operational temperature | -30 to 75 °C |
| Dimension | 420 mm |
| Interface | LAN, WiFI |
| Gain | 25 dBi |
| Polarization | Lineární - horizontální a vertikální |
| Radiating angle - H | 8°/8° |
| Radiating angle - V | 8° |
| Procesor | MIPS 24KC, 400 MHz |
| RAM | 32 MB |
| NAND | 8 MB |
| Weight | 0,5 kg |
| OS | AirOS V |
| IPv6 support | Transparent (Bridge Mode) |
Product 10 / 18
