Product Search
- Ubiquiti 2,4 GHz (5)
- Ubiquiti 5 GHz (6)
- Ubiquiti AirMAX 2,4 GHz (4)
- Ubiquiti AirMAX 5 GHz (18)
- Ubiquiti AirMAX 10 GHz (3)
- MikroTik RouterBoards (38)
- MikroTik miniPCI cards (4)
- MikroTik other (29)
- CC&C wireless (2)
- GOLDWEB wireless (3)
- GOLDWEB wired (5)
- TP-Link wireless (20)
- TP-Link wired (43)
- PC Engines ALIX (6)
- Antennas 2,4 GHz (7)
- Antennas 5 GHz (52)
- miniPCI cards (12)
- IP cameras + recorders (31)
- EU 230V powering (38)
- LED bulbs (40)
- Accesories (23)
- Green Energy (10)
- EVBike (17)
- GPS (3)
- Services (2)
You are here: / Ubiquiti 2,4 GHz All prices without VAT
Customer who bought this product also bought:
UBIQUITI Bullet2HP - mini outdoor AP/client 2,4 GHz, 1x LAN
Miniature and very powerfull outdoor client / AP for 2,4GHz band. It can be mounted directly to antenna easily. Unit have integrated signal strength LED indicator as well.
HP version has over 33% higher power output than the standard model!
Bullet2HP is designed to bridge the long distance between the AP and client, even in noisy areas. There is no power jack on the device, because there is integrated POE splitter, and it is powered directly by UTP cable. As in the Nanostation, Bullet2HP NanoStation also runs a popular system AirOS with czech support.
In Bridge and WDS mode device supports IPv6 transparent transfers.
The package contains only the unit. POE injector and power supply must be purchased separately, see related products.
NOTE! The unit must be installed in a horizontal position so that the N-male connector is higher than the output of UTP cable. In a vertical position can only be installed UTP cable connector pointing to the ground.
Bullet2HP is designed to bridge the long distance between the AP and client, even in noisy areas. There is no power jack on the device, because there is integrated POE splitter, and it is powered directly by UTP cable. As in the Nanostation, Bullet2HP NanoStation also runs a popular system AirOS with czech support.
In Bridge and WDS mode device supports IPv6 transparent transfers.
The package contains only the unit. POE injector and power supply must be purchased separately, see related products.
NOTE! The unit must be installed in a horizontal position so that the N-male connector is higher than the output of UTP cable. In a vertical position can only be installed UTP cable connector pointing to the ground.
Bullet2HP_v40build4974.zip
manual_bullet.pdf
b2hp_datasheet.pdf
b2hp_DoC.pdf
Bullet2HP-v3.4-build[4390].bin
Bullet2HP-v3.5.build4494.zip
Bullet2HP_v3_6_1_build4866.zip
Specification
| Operation mode | AP, Client, WDS |
| Frequence | 2412 - 2462 MHz |
| DHCP | yes |
| Transmission speed | 54 Mbps |
| Standards | 802.11b/g |
| Chipset | Atheros |
| Output for an external antenna | 1x N male |
| TX Power regulation | yes |
| Max. output power | 29 dBm |
| Sensitivity | -97 dBm |
| Modulation | DSSS, OFDM |
| Encryption | WEP 64, WEP 128, WPA, WPA2, 802.1X |
| Comformity | FCC, CE |
| LAN port | 1x RJ45 10/100 Mbps |
| Default IP | 192.168.1.20 |
| Default name | ubnt |
| Default password | ubnt |
| Power supply | Pouze po Ethernetu (12-24V) |
| Operational temperature | -20 to 70 °C |
| Dimension | 152 x 37 x 31 mm |
| Procesor | Atheros MIPS 4KC, 180 MHz |
| RAM | 16 MB |
| NAND | 4 MB |
| Weight | 0,18 Kg |
| OS | AirOS |
| IPv6 support | Transparent (Bridge Mode) |
Product 1 / 5
